50mm Acrylic Round Blank | Glitter Colours | 3mm Thick

Laser cut 50mm round shaped acrylic blank with a 4mm hole cut out. 

50mm diameter / 5cm / 1.96"

The Nitty Gritty:

- Acrylics will arrive with protective plastic/paper on BOTH sides of the blank. They will have either a paper backing or a plastic backing (the plastic backing may be clear, white or tinted light green). Once this backing is removed, you'll be left with an imperfection free, acrylic blank. 

- Glitter acrylic blanks are a gloss finish on both sides.

Pro Tips:

- Peel the protective covering off both sides of the blank before using (if your blank is made from acrylic). 

- Do NOT use isopropyl or any kind of solvent to clean your acrylics. Simply use warm, soapy water or a magic eraser if required. Isopropyl and other solvents can cause acrylic to become brittle or crack (cracks may not always be visible immediately but can appear down the track).

- Lightly sand any acrylics that you're planning to seal with resin (it gives the resin something to adhere to)